Protecting Your Water Supply Starts with Proper Backflow Prevention

Backflow preventers help protect your drinking water by stopping contaminated or non-potable water from flowing backward into the clean water supply. When an assembly fails, is damaged, or is due for testing, it needs to be evaluated by a qualified professional.

S&S Plumbing provides residential and commercial backflow testing, inspection, repair, retesting, and replacement throughout San Antonio and surrounding areas. Whether your annual test is due, you’ve received a testing notice, or an existing assembly isn’t working properly, our team can help determine the right next step.

🪪 License # TSBPE M-36596
⭐ 5.0 Google Rating
🏅 BBB A+ Accredited

Residential & Commercial Backflow Services

Backflow prevention assemblies are used where plumbing connections create the potential for contaminated water to enter the potable water supply. This can include residential irrigation systems as well as more complex commercial plumbing applications.

Our backflow services include:

  • Backflow prevention assembly testing
  • Backflow inspections
  • Backflow preventer troubleshooting
  • Backflow preventer repairs
  • Backflow preventer replacement
  • Retesting after repairs
  • Residential backflow services
  • Commercial backflow services

If an assembly fails testing, it doesn’t always need to be replaced. Our team identifies the cause of the failure and recommends repair or replacement based on the condition of the device.

Residential Backflow Testing & Repair

For homeowners, lawn irrigation is one of the most common applications for backflow prevention. Irrigation systems can be exposed to soil, fertilizers, pesticides, standing water, and other contaminants that should not be allowed to flow backward into the home’s drinking water supply.

Not every home has the same backflow requirements. Testing depends on the property’s plumbing configuration, installed assembly, potential cross-connections, and water-provider requirements.

Homeowners may need backflow testing when:

  • An applicable assembly is due for its annual test
  • A testing or compliance notice has been received
  • The home has an irrigation system with a testable backflow assembly
  • A backflow preventer has been installed, repaired, relocated, or modified
  • The device is leaking or has visible damage
  • There is concern that an existing assembly is no longer working properly

S&S Plumbing can test the assembly, identify issues affecting its performance, and recommend the appropriate next step.

Explore Residential Plumbing Service & Repair →

Commercial Backflow Testing & Repair

Commercial properties often have more complex plumbing systems and more potential cross-connections. Proper backflow prevention helps protect the potable water supply while supporting applicable testing and compliance requirements.

Backflow prevention may be required for commercial systems involving:

  • Irrigation systems
  • Fire protection systems
  • Restaurants and food-service operations
  • Medical and healthcare facilities
  • Commercial equipment
  • Manufacturing or industrial processes
  • Other systems with potential cross-connections

Businesses may need testing when an applicable assembly reaches its annual testing date, a testing notice is received, a new device is installed, or an existing assembly has been repaired or modified.

S&S Plumbing provides commercial backflow testing and repair for businesses, property managers, and facilities throughout the San Antonio area.

Explore Commercial Plumbing Service & Repair →

Backflow Testing, Repairs & Replacement

Testing verifies that the mechanical components inside a backflow prevention assembly are functioning as intended. If the device doesn’t pass, the next step is finding out why.

Backflow Testing & Inspection

A qualified tester evaluates the assembly using appropriate testing equipment and checks for problems that may affect its performance, including leaks, damage, deterioration, or other visible concerns.

Backflow Preventer Repairs

A failed test doesn’t automatically mean you need a new device. Depending on the condition of the assembly, worn or damaged components may be cleaned, repaired, or replaced. The assembly should then be retested to verify proper operation.

Backflow Preventer Replacement

When an assembly is severely damaged, deteriorated, or no longer practical to repair, replacement may be the better long-term solution. Our team can evaluate the existing device and explain your options.

Common Backflow Preventer Problems

Backflow preventers contain mechanical components that can wear, collect debris, or become damaged over time.

Common problems include:

  • Worn or damaged seals
  • Failing check valves
  • Debris or mineral buildup
  • Leaking components
  • Corrosion or deterioration
  • Pressure-related problems
  • Weather or freeze damage
  • Failed testing

Not every problem is visible from the outside. An assembly can appear normal while its internal components are no longer functioning correctly, which is why required testing matters.

Received a Backflow Testing Notice?

Applicable backflow prevention assemblies in San Antonio are required to be tested upon installation and at least annually thereafter. Testing may also be required following certain repairs, relocation, or changes to an assembly.

If you’ve received a testing notice, S&S Plumbing can test your backflow preventer and identify any issues affecting its performance. If the assembly doesn’t pass, we can determine whether repair or replacement is appropriate and retest the assembly after repairs are completed.

Schedule Your Backflow Test

Why Choose S&S Plumbing?

20 Years of Experience

Serving San Antonio and surrounding communities since 2006.

Residential & Commercial Expertise

Experience with backflow prevention across homes, businesses, and commercial facilities.

Testing & Repair Capabilities

Testing, troubleshooting, repair, retesting, and replacement in one place.

Clear Recommendations

We explain what we find and whether repair or replacement makes sense.

Licensed & Insured

Professional plumbing service backed by experience and quality workmanship.

Service Area

S&S Plumbing provides residential and commercial backflow testing and repair throughout San Antonio and surrounding communities.

Backflow Testing FAQs

How often does a backflow preventer need to be tested?

In San Antonio, applicable backflow prevention assemblies must be tested when installed and at least annually thereafter. Testing may also be required following repairs, relocation, or other changes depending on the assembly and applicable requirements.

Do all homeowners need annual backflow testing?

No. Requirements depend on the plumbing systems, connections, and backflow prevention assemblies present at the property. Residential irrigation systems are a common application where a testable backflow assembly may be required.

Why does an irrigation system need backflow prevention?

Irrigation water can come into contact with soil, fertilizers, pesticides, and other contaminants. Backflow prevention helps keep that water from flowing backward into the potable water supply.

Do commercial properties need backflow testing?

Commercial properties with applicable backflow prevention assemblies may be subject to annual testing requirements. This can include properties with irrigation, fire protection, commercial equipment, or other potential cross-connections.

What happens if a backflow preventer fails its test?

A failed assembly should be evaluated to determine the cause. Depending on its condition, individual components may be repaired or replaced, or the full assembly may need replacement. After repairs, the assembly should be retested.

Can a backflow preventer be repaired instead of replaced?

Often, yes. A failed test doesn’t automatically mean the entire assembly needs replacement. The condition of the device and cause of the failure determine whether repair or replacement is the better solution.

Who can perform required backflow testing?

Required backflow testing must be performed by an appropriately licensed backflow prevention assembly tester. Some specialized systems may have additional testing requirements.

Schedule Backflow Testing & Repair

Whether your annual test is due, you’ve received a testing notice, or your backflow preventer needs repair, S&S Plumbing is ready to help.

Contact our team today to schedule residential or commercial backflow testing, repair, retesting, or replacement in the San Antonio area.